XP Contours
XP-100 Type Contours
Unless otherwise noted all of these profiles are 15″ long with all of the barrel usable. A barrel with a finished length over 15″ is considered a rifle barrel for pricing purposes. To see a .pdf CAD drawing file click on the orange Designation in the left column. The weights are calculated from a solid model with a .30 caliber hole. Threading and chambering and a caliber change will alter the weight.| updated: | |||
| 15APR13 | Lilja 15″ long XP-100 type contours | weight |
lgth. |
| Designation | Specifications: | ||
| xp 1 | 1.200 for 2.5″ then st. taper to .625″ at 15″ |
2.80 |
15 |
| xp 2 | 1.200″ for 2.7″ then st. taper to .825″ at 4.7″ then .825″ st. to 15″ |
2.50 |
15 |
| xp 3 | 1.250″ for 2.25″ the st. taper to .900″ at 3.40″ then st. taper to muzzle of .620″ |
2.21 |
15 |
| xp 4 | 1.200″ for 2.5″ then 20″ radius down to .680″ at 5.50″ then st. taper to .600″ at 15″ |
1.82 |
15 |
| xp 5 | 1.200″ for 3″ then 30″ radius down to .800″ at 6.00″ then st. taper to .725″ at 15″ |
2.36 |
15 |
| xp 6 | 1.250: for 2.6″ then 30″ radius down to .900″ at 4.50″ then .900″ st. out to muzzle at 15″ |
2.88 |
15 |
| xp 7 | 1.200″ for 2.5″ then 20″ radius down to .680″ at 5.50″ then st. to .680″ at 15″ |
1.92 |
15 |
| xp 8 | 1.200″ for 2.5″ then 24″ radius down to .825″ at 5.5″ then st taper to .750″ at 15″ |
2.34 |
15 |
| xp 9 | 1.200″ for 2.5″ then st. taper to .650″ at 15″ (very similar to xp 1) |
2.86 |
15 |
| xp 10 | copy of Savage model 516 contour except shank dia. is 1.065″ for 2.5″ and OAL is 15″ muzzle dia. is .725″ (original Savage was 12.3″ OAL) |
2.08 |
15 |
| xp 11 | 1.200″ for 2.5″, .725″ at radius tangent and .640″ at 15″ (similar to Remington contour) |
2.16 |
15 |
| xp 12 | 1.250″ for 2.5″ then st. taper to .800″ at 15″ |
3.43 |
15 |
| xp12-20 | same as xp 12 but with 20″ finish length, .800″ at 20″ (note: this is a rifle barrel) |
4.49 |
20 |
| xp 13 | 1.350″ for 2.5″ then 30″ radius down to .900″ at 5.5″ then st. taper to .800″ at 15″ (made from 1.50″ dia. steel) |
2.93 |
15 |
| xp 14 | 1.200″ for 2.5″ then taper to .855″ over 1″ then st. taper to .575″ at 15″ |
1.99 |
15 |
| (very similar to Remington 7 BR contour but longer on 1.200″ dia.) | |||
| xp 15 | 1.200″ for 2.5″ then radius over 3″ length to .900″ then taper to .800″ at 15″ |
2.62 |
15 |
| xp 16 | 1.200″ for 2.5″ then radius over 2.5″ to .800″ then st. taper to .600″ at 15″ |
2.05 |
15 |
| xp 17 | 1.025″ for 2.750″ then st. taper to .900″ at 15″ | 2.36 | 15 |
| xp 18 | 1.200″ for 2.5″ then st. taper to .855 at 3.5″ then st. taper to .755″ at 15″ | 2.32 | 15 |
| xp 19 | 1.180″ for 2.500″ then st. taper to .770″ over 5.5″, then st. taper to .700″ | 2.42 | 15 |
| xp 20 | 1.350″ for 3.750″ then st. taper to .855″ at 4.5″ then st taper to .575″ at 15″ |
2.61 |
15 |
| xp 21 | 1.190″ for 4.5″ then st. taper to .550″ at 15.0″ |
3.08 |
15 |
| xp 22 | 1.250″ for 2.5″ then st. taper to .900″ at 15″ |
3.92 |
15 |
| tc 1 | 1.00″ for 2.5″ then radius down to .750″ over 4″ then st. to .750″ dia. muzzle |
1.86 |
15 |
| xphtr | 1.200″ for 3″ then st. taper to 1.000″ at 15″ |
3.78 |
15 |
| xpremvrmt | Copy of Remington Varmint Contour | 3.09 | 15 |
| To place an order for any one of these contours use our designation in the left column. | |||
| We can program for special tapers not listed here for a one-time $40 charge. | |||
