Lilja Straight Taper List
To see a .pdf CAD drawing click on the orange designation in the left column. The Blank Weight column uses a calculated weight derived from the CAD program. Threading, chambering and shortening the barrel from the blank length will reduce the weight of a finished barrel. And these weights are also calculated with a .308 caliber hole through the model. Changing calibers will change the weight.| last change: | 10/6/2023 | |||
|
Lilja special straight tapers |
||||
| Designation | Blank | Blank | Blank | |
| length | Weight | dia. | ||
| taper 1 | 1.350″ for 5″ then st. taper to 1″ at 34″ |
34 |
10.02 |
1.5 |
| taper 2 | 1.350″ for 5″ then st. taper to .900″ at 36″ |
36 |
9.85 |
1.5 |
| taper 3 | 1.200 for 5″ then st. taper to .955″ at 28″ (.010″ per inch) |
28 |
6.80 |
1.25 |
| taper 4 | 1.250″ for 9″ then st. taper to .950 at 30″ |
30 |
7.97 |
1.25 |
| taper 5 | 1.490″ for 5″ then straight taper to 1.040″ at 35″ (HV taper) |
35 |
12.20 |
1.5 |
| taper 6 | 1.060″ for 3″ then st. taper to .632 at 28″ (.700″ at 24″, .017″ per inch) (taper 6 is the same as rf 52) |
28 |
4.12 |
1.25 |
| taper 7 | 1.350″ HV, 1.350″ for 5″ then st. taper to 1.000″ at 28″ (see taper 106) |
28 |
8.33 |
1.5 |
| taper 8 | 1.740″ for 7″ then st. taper to 1.700″ at 29″ (also for .50’s) |
29 |
18.11 |
1.75 |
| taper 9 | 1.450″ for 5″ then st. taper to 1.250″ at 32″ (1.243″ at 33″) |
33 |
13.30 |
1.5 |
| taper 10 | 1.150″ HV (1.150″ for 5″ then st. taper to .800″ at 28″) |
28 |
5.65 |
1.25 |
| taper 11 | 1.300″ for 6″ then straight taper to .970″ at 28″ (HV taper) |
28 |
7.81 |
1.5 |
| taper 12 | 1.300″ for 6″ then straight taper to .940″ at 30″ |
30 |
8.16 |
1.5 |
| taper 13 | 1.100″ for 4″ then st. taper to .925″ at 28″ |
28 |
5.82 |
1.25 |
| taper 14 | 1.250″ for 5″ then st. taper to 1″ at 30″See also (117, 118, 172, 187, 194) |
30 |
7.96 |
1.25 |
| taper 15 | 1.200″ for 2.5″ then st. taper to .900″ at 30″ (see taper 36) copy of Winchester Highwall |
30 |
6.78 |
1.25 |
| taper 16 | 1.350″ for 5″ then st. taper to .890″ at 33″ (.016″ per inch) |
33 |
9.02 |
1.5 |
| taper 17 | .985″ for 4.5″ then st. taper to .940″ at 28″ (could be used as a rimfire taper) |
28 |
5.09 |
1 |
| taper 18 | 1.200″ for 4″ then st. taper to .800″ at 26″ (.767″ at 28″) see taper 81 |
28 |
5.79 |
1.25 |
| taper 19 | 1.250″ for 5″ then st. taper to .950″ at 28″ (.925″ at 30″) |
30 |
7.53 |
1.25 |
| taper 20 | 1.050″ for 3″ then st. taper to .825″ at 27″ (.815″ at 28″) |
28 |
4.88 |
1.25 |
| taper 21 | 1.450″ for 6″ then st. taper to 1.030″ at 33″ (HV taper) |
33 |
11.14 |
1.5 |
| taper 22 | 1.250″ for 5″ then st. taper to 1.000″ at 26″ (.975″ at 28″) |
28 |
7.32 |
1.25 |
| taper 23 | 1.250″ for 5″ then st. taper to .925″ at 30″ (see taper 19) |
30 |
7.53 |
1.25 |
| taper 24 | 1.250″ for 5″ then st. taper to .825″ at 30″ (similar to taper 120) |
30 |
6.99 |
1.25 |
| taper 25 | 1.250″ for 6″ then st. taper to .970″ at 33″ (similar to taper 39) |
34 |
8.79 |
1.25 |
| taper 26 | 1.050″ for 3″ then st. taper to .700″ at 28″ (this is a Sako taper too) |
28 |
4.35 |
1.25 |
| taper 27 | 1.300″ for 4″ then st. taper to .850″ at 26″ .810″ at 28″ |
28 |
6.78 |
1.5 |
| taper 28 | 1.365″ for 4″ then st. taper to .900″ at 26. .858″ at 28″ |
28 |
7.58 |
1.5 |
| taper 29 | 1.300″ for 6″ then st. taper to 1.080″ at 28″ , 1.050″ at 31″ |
31 |
9.07 |
1.5 |
| taper 30 | 1.350″ for 5″ then st. taper to .950″ at 30″ |
30 |
8.77 |
1.5 |
| taper 31 | 1.350″ for 5.5″ then st. taper to .830″ at 31″ |
31 |
8.23 |
1.5 |
| taper 32 | 1.375″ for 3″ then st. taper to 1.000″ at 32″ (.988″ at 33″) |
33 |
9.71 |
1.5 |
| taper 33 | 1.250″ for 6″ then st. taper to 1.046″ at 28″ |
28 |
7.76 |
1.25 |
| taper 34 | 1.250″ for 5″ then st. taper to .885″ at 32″ |
32 |
7.77 |
1.25 |
| taper 35 | 1.350″ for 4″ then st. taper to 1.062″ at 31″ (1.051″ at 32″) |
32 |
9.71 |
1.5 |
| taper 36 | 1.200″ for 3″ then st. taper to .900″ at 30″ (see taper 15) |
30 |
6.82 |
1.25 |
| taper 37 | 1.375″ for 3″ then st. taper to 1.1 at 30″ |
30 |
9.61 |
1.5 |
| taper 38 | 1.300″ for 5″ then HV taper to .865″ at 34″ |
34 |
8.60 |
1.5 |
| taper 39 | 1.250″ for 6″ then st. taper to .970″ at 33″ (similar to taper 25) |
33 |
8.60 |
1.25 |
| taper 40 | 1.375″ for 5″ then HV taper to 1.000″ at 31″ |
31 |
9.43 |
1.5 |
| taper 41 | 1.500″ for 5″ then st. taper to 1.150″ at 29″ (HV taper) |
29 |
11.03 |
1.5 |
| taper 42 | 1.250″ for 5″ then st. taper to 1.125″ at 32″ |
32 |
9.30 |
1.25 |
| taper 43 | 1.250″ for 10″ then st. taper to 1.000″ at 32″ |
32 |
8.79 |
1.25 |
| taper 44 | 1.750″ for 10″ then st. taper to 1.5″ at 36″ (also use for .50’s) |
37 |
19.52 |
1.75 |
| taper 45 | 1.230″ for 7″ then st. taper to .925″ at 30″ |
30 |
7.51 |
1.25 |
| taper 46 | 1.250″ for 4″ then st. taper to .750″ at 32″ |
32 |
6.89 |
1.25 |
| taper 47 | 1.350″ for 6″ then st. taper to 1.00″ at 30″ (.985″ at 31″) |
31 |
9.18 |
1.5 |
| taper 48 | 1.250″ for 4″ then st. taper to .785″ at 30″ |
30 |
6.67 |
1.25 |
| taper 49 | 1.250″ for 5″ then st. taper to .850″ at 32″ |
32 |
7.57 |
1.25 |
| taper 50 | 1.450″ for 9″ then st. taper to 1.250″ at 30″ (1.240″ at 31″) |
31 |
12.11 |
1.5 |
| taper 51 | 1.250″ for 5″ then st. taper to .920″ at 24″ (.017″/inch .852″ at 28″) (similar to taper 90) |
28 |
6.69 |
1.25 |
| taper 52 | 1.250″ for 5″ then st. taper to .900″ at 30″ (.014″ per inch) |
30 |
7.39 |
1.25 |
| taper 53 | 1.365″ for 4″ then st. taper to .950″ at 28″ |
28 |
8.08 |
1.5 |
| taper 54 | 1.250″ for 5″ then st. taper to 1.100″ at 28″ |
28 |
8.01 |
1.25 |
| taper 55 | 1.600″ for 6″ then st. taper to 1.375″ at 33″ (.008″ per inch) |
33 |
15.63 |
1.75 |
| taper 56 | 1.250″ for 4″ then st. taper to .825″ at 27″ (.807″ at 28″) |
28 |
6.37 |
1.25 |
| taper 57 | 1.500″ for 5″ then st. taper to 1.250″ at 28″ |
28 |
11.31 |
1.5 |
| taper 58 | 1.200″ for 8″ then st. taper to .650″ at 28″ |
28 |
5.74 |
1.25 |
| taper 59 | 1.490″ for 5″ then st. taper to .900″ at 31″ |
31 |
9.98 |
1.5 |
| taper 60 | 1.475″ for 4″ then st. taper to .858″ at 28″ |
28 |
8.55 |
1.5 |
| taper 61 | 1.250″ for 5″ then st. taper to 1″ at 35″ |
35 |
9.24 |
1.25 |
| taper 62 | 1.200″ for 2.5″ then st. taper to .875″ at 30″ (.864″ at 31″, .011″ per inch taper) |
31 |
6.78 |
1.25 |
| taper 63 | 1.400″ for 5″ then st. taper to 1.100″ at 34″ |
34 |
11.29 |
1.5 |
| taper 64 | 1.250″ for 4″ then st. taper to .875″ at 30″ |
30 |
7.17 |
1.25 |
| taper 65 | 1.375″ for 7″ then st. taper to .865″ at 31″ (.950″ at 27″) |
31 |
8.87 |
1.5 |
| taper 66 | 1.350″ for 5″ then st. taper to .925″ at 30″ |
30 |
8.45 |
1.5 |
| taper 67 | 1.250″ for 3.5″ then st. taper to 1.000″ at 28″ |
28 |
7.36 |
1.25 |
| taper 68 | 1.490″ for 6″ then st. taper to 1.150″ at 33″ |
33 |
12.46 |
1.5 |
| taper 69 | 1.450″ for 11″ then st. taper to 1.350″ at 33″ (.0045″ per inch) |
34 |
14.06 |
1.5 |
| taper 70 | 1.240″ for 6″ then st. taper to .950″ at 30″ (similar to taper 121) |
30 |
7.66 |
1.25 |
| taper 71 | 1.250″ for 3″ then st. taper to .900″ at 26″ (.870 at 28″) |
28 |
6.59 |
1.25 |
| taper 72 | 1.210″ for 4″ then st. taper to .872″ at 28″ (Giles 7) |
28 |
6.38 |
1.25 |
| taper 73 | 1.270″ for 2.5″ then st. taper to 1.052″ at 31″ (.0076″/inch) |
31 |
8.59 |
1.5 |
| taper 74 | 1.450″ for 5.25″ then st. taper to 1.250″ at 28″ |
28 |
10.82 |
1.5 |
| taper 75 | 1.450″ for 5″ then st. taper to 1.250″ at 31″ (.0077″/inch) |
31 |
11.93 |
1.5 |
| taper 76 | 1.085″ for 3″ then st. taper to .950″ at 37″ |
37 |
7.65 |
1.25 |
| taper 77 | 1.100″ for 3″ then drop to 1.000″ (w/ R. in corner) then st. taper to .730″ at 30″ |
30 |
5.20 |
1.25 |
| taper 78 | 1.450″ for 20″ then st. taper to 1.350″ at 39″ |
39 |
16.39 |
1.5 |
| taper 79 | 1.050″ for 2.5″ then st. taper to .900″ at 30″ (Win Highwall, see taper 15) |
30 |
5.66 |
1.25 |
| taper 80 | 1.250″ for 4″ then st. taper to .650″ at 28″ (.750″ at 24″) |
28 |
5.63 |
1.25 |
| taper 81 | 1.200″ for 4″ then st. taper to .727″ at 30″ (.018″/inch) also taper 18 |
30 |
5.97 |
1.25 |
| taper 82 | 1.200″ for 3″ then st. taper to 1.000″ at 27″ (.992″ at 28″ – .008″/inch) also same as Savage M. 12 |
28 |
6.89 |
1.25 |
| taper 83 | 1.250″ for 3″ then st. taper to .700″ at 24″ (.595″ at 28″ – .026″/inch) |
28 |
5.25 |
1.25 |
| taper 84 | 1.490″ for 5″ then st. taper to 1.400″ at 32″ |
32 |
13.97 |
1.5 |
| taper 85 | 1.125″ for 4″ then st. taper to .853″ at 28″ (.875″ at 26″) |
28 |
5.64 |
1.25 |
| taper 86 | 1.150″ for 2.5″ then st. taper to .750″ at 28″ |
28 |
5.20 |
1.25 |
| taper 87 | 1.150″ for 3″ then st. taper to .832″ at 28″ |
28 |
5.65 |
1.25 |
| taper 88 | 1.200 for 3″ then st. taper to .889″ at 31″ (.011″/inch) same as taper 36 but 31″ long blank |
31 |
6.97 |
1.25 |
| taper 89 | 1.450″ for 12″ then st. taper to 1.345″ at 33″ (.005″/inch taper) |
33 |
13.69 |
1.5 |
| taper 90 | 1.250″ for 5″ then st. taper to .875″ at 27″ (.858″ at 28″) (similar to taper 51) |
28 |
6.72 |
1.25 |
| taper 91 | 1.125″ for 4″ then st. taper to .750″ at 26″ (.716″ at 28″) Cooper M. 22 |
28 |
5.00 |
1.25 |
| taper 92 | 1.165″ for 7″ then st. taper to .900″ at 30″ |
30 |
6.79 |
1.25 |
| taper 93 | 1.350″ for 6″ then st. taper to 1.100″ at 42″ (1.093″ at 43″) |
43 |
13.50 |
1.5 |
| taper 94 | 1.250″ for 7″ then st. taper to .950″ at 27″ (.935″ at 28″) |
28 |
7.27 |
1.25 |
| taper 95 | 1.450″ for 6″ then st. taper to 1.000″ at 36″ |
36 |
11.86 |
1.5 |
| taper 96 | 1.250″ for 7″ then st. taper to .850″ at 34″ |
34 |
8.20 |
1.25 |
| taper 97 | 1.100″ for 3″ then st. taper to .750″ at 30″ |
30 |
5.24 |
1.25 |
| taper 98 | 1.450″ for 5″ then st. taper to 1.125″ at 27″ (1.110″ at 28″) |
28 |
9.92 |
1.5 |
| taper 99 | 1.200″ for 3″ then st. taper to .792″ at 28″ (.920″ at 20″) |
28 |
5.81 |
1.25 |
| taper 100 | 1.350″ for 5″ then st. taper to 1.250″ at 30″ |
30 |
10.52 |
1.5 |
| taper 101 | 1.350″ for 10″ then st. taper to 1.000″ at 32″ |
32 |
9.93 |
1.5 |
| taper 102 | 1.200″ for 4″ then st. taper to .725″ at 34″ |
34 |
6.70 |
1.25 |
| taper 103 | 1.250″ for 6.5″ then st. taper to .900″ at 28″ |
28 |
7.06 |
1.25 |
| taper 104 | 1.250″ for 2.5″ then st. taper to 1.100″ at 30″ |
30 |
8.47 |
1.25 |
| taper 105 | 1.350″ for 5″ then st. taper to 1.120″ at 32″ |
32 |
10.27 |
1.5 |
| taper 106 | 1.350″ for 4″ then st. taper to 1.025″ at 28″ (similar to taper 7) |
28 |
8.39 |
1.5 |
| taper 107 | 1.050″ for 3″ then st. taper to .600″ at 24″ (Win Low Wall) .515″ at 28″ |
28 |
3.59 |
1.25 |
| taper 108 | 1.250″ for 2.5″ then st. taper to 1.150″ at 30″ |
30 |
8.82 |
1.25 |
| taper 109 | 1.250″ for 2.5″ then st. taper to 1.150″ at 33″ |
33 |
9.69 |
1.25 |
| taper 110 | 1.450″ for 3.5″ then st taper to 1.000″ at 32″ |
32 |
10.31 |
1.5 |
| taper 111 | 1.140″ for 4.0″ then st. taper to .785″ at 24″ (.714″ at 28″) |
28 |
5.10 |
1.25 |
| taper 112 | 1.350″ for 5″ then st. taper to 1.120″ at 30″ |
30 |
9.65 |
1.5 |
| taper 113 | 1.120″ for 4.0″ then st. taper to .760″ at 28″ |
28 |
5.16 |
1.25 |
| taper 114 | 1.450″ for 6″ then st. taper to 1.200″ at 32″ |
32 |
12.00 |
1.5 |
| taper 115 | 1.250″ for 4″ then st. taper to .900″ at 34″ |
34 |
8.24 |
1.25 |
| taper 116 | 1.350″ for 5″ then st. taper to 1.100″ at 34″ |
34 |
10.74 |
1.5 |
| taper 117 | 1.250″ for 5″ then st. taper to 1.000″ at 31″ |
31 |
8.22 |
1.25 |
| taper 118 | 1.250″ for 5″ then st. taper to 1.000″ at 32″ |
32 |
8.47 |
1.25 |
| taper 119 | 1.300″ for 4″ then st. taper to .800″ at 30″ |
30 |
7.18 |
1.5 |
| taper 120 | 1.250″ for 6″ then st. taper to .825″ at 30″ (similar to taper 24) |
30 |
7.09 |
1.25 |
| taper 121 | 1.250″ for 6″ then st. taper to .970″ at 30″ (similar to taper 70) |
30 |
7.86 |
1.25 |
| taper 122 | 1.375″ for 5.50″ then st taper to .850″ at 30″ (.829″ at 31″) |
31 |
8.47 |
1.5 |
| taper 123 | 1.375″ for 4.50″ then st taper to .850″ at 26″ (.801″ at 28″) |
28 |
7.44 |
1.5 |
| taper 124 | 1.050″ for 11.50″ then st. taper to .852″ at 31″ (.882″ at 28″) |
31 |
6.07 |
1.25 |
| taper 125 | 1.450″ for 5.0″ then st. taper to 1.275″ at 30″ |
30 |
11.74 |
1.5 |
| taper 126 | 1.400″ for 5.0″ then st. taper to .900″ at 30″ |
30 |
8.79 |
1.5 |
| taper 127 | 1.140″ for 4″ then st. taper to .593″ at 28″ (copy of Kimber 204 taper original is .685″ at 22.5″) |
28 |
4.59 |
1.25 |
| taper 128 | 1.060″ for 3″ then st. taper to .700″ at 24″ (could be used for rim fire) |
24 |
3.81 |
1.25 |
| taper 129 | 1.200″ dia. for 10″ then st. taper to 1.000″ at 30″ |
30 |
7.76 |
1.25 |
| taper 130 | 1.450″ for 5″ then st. taper to 1.075″ at 30″ (1.060″ at 31″) |
31 |
10.59 |
1.5 |
| taper 131 | 1.350″ dia. For 4″ then st. taper to .900″ at 32″ |
32 |
8.71 |
1.5 |
| taper 132 | 1.350″ dia. For 6″ then st. taper to 1.000″ at 38″ |
38 |
11.24 |
1.5 |
| taper 133 | 1.175″ dia. for 4″ then st. taper to .848″ at 28″ |
28 |
5.99 |
1.25 |
| taper 135 | 1.250″ for 7″ then st. taper to .935″ at 32″ |
32 |
8.23 |
1.25 |
| taper 136 | 1.350″ for 3″ then st. taper to 1.240″ at 28″ |
28 |
9.70 |
1.5 |
| taper 137 | 1.350″ for 5″ then st. taper to .900″ at 30″ |
30 |
8.31 |
1.5 |
| taper 138 | 1.350″ for 5″ then st. taper to 1.000″ at 30″ |
30 |
8.90 |
1.5 |
| taper 139 | 1.250″ for 5″ then st. taper to 1.100″ at 34″ |
34 |
9.69 |
1.25 |
| taper 140 | 1.200″ for 5″ then st/ taper to .900″ at 27″ (.887″ at 28″) M24 contour (See taper 231) |
28 |
6.45 |
1.25 |
| taper 141 | 1.125″ for 4″ then st. taper to .682″ at 30″ (same as taper 91 but 30″) |
30 |
5.17 |
1.25 |
| taper 142 | 1.450″ for 10″ then st. taper to 1.100″ at 32″ |
32 |
11.70 |
1.5 |
| taper 143 | 1.350″ for 6″ then taper to 1.200″ over 3″ then st. taper to 1.000″ at 35″ |
35 |
9.55 |
1.5 |
| taper 144 | 1.375″ for 8.5″ then st. taper to 1.125″ at 34″ |
34 |
11.45 |
1.5 |
| taper 145 | 1.400″ dia. for 5″ then st. taper to .855″ at 32″ (.875″ at 31″) |
32 |
9.05 |
1.5 |
| taper 146 | 1.450″ for 4″ then st. taper to .941″ at 30″ |
30 |
9.38 |
1.5 |
| taper 147 | 1.250″ for 4″ then st. taper to .759″ at 28″ (.800″ at 26″) (Mk13 Mod 7 taper) (see 232) |
28 |
6.13 |
1.25 |
| taper 148 | 1.450″ for 5″ then st. taper to .920″ at 36″ |
36 |
11.13 |
1.5 |
| taper 149 | 1.350″ for 6″ then st. taper to .950″ at 34″ |
34 |
9.78 |
1.5 |
| taper 150 | 1.156″ for 2.5″ then st. taper to .900″ at 28″ |
28 |
6.02 |
1.25 |
| taper 151 | 1.125″ for 2.5″ then st. taper to .985″ at 30″ (Savage M. 12 F/TR) |
30 |
6.71 |
1.25 |
| taper 152 | 1.350″ for 5″ then st. taper to .867″ at 34″ (.900″ at 32″) |
34 |
9.12 |
1.5 |
| taper 153 | 1.125″ for 4″ then st. taper to .900″ at 30″ |
30 |
6.28 |
1.25 |
| taper 154 | 1.188″ for 2.5″ then st. taper to .736″ at 28″ |
28 |
5.40 |
1.25 |
| taper 155 | 1.250″ for 5″ then st. taper to .900″ at 28″ (similar to HV taper) |
28 |
6.93 |
1.25 |
| taper 156 | 1.350″ for 6″ then st. taper to .950″ at 32″ |
32 |
9.24 |
1.5 |
| taper 157 | 1.450″ for 5″ then st. taper to 1.100″ at 32″ |
32 |
11.06 |
1.5 |
| taper 158 | 1.200″ for 6″ then st. taper to .843″ at 28″ (.875″ at 26″) |
28 |
6.32 |
1.5 |
| taper 159 | 1.450″ for 10″ then st. taper to 1.200″ at 45″ |
45 |
16.99 |
1.5 |
| taper 160 | 1.450″ for 6″ then st. taper to 1.100″ at 38″ |
38 |
13.30 |
1.5 |
| taper 161 | 1.040″ for 3″ then st. taper to .754″ at 28″ |
28 |
4.52 |
1.25 |
| taper 162 | 1.160″ for 3.5″ then st. taper to .685″ at 32″ |
32 |
5.74 |
1.25 |
| taper 163 | 1.400″ for 6″ then st. taper to .925″ at 33″ |
33 |
9.89 |
1.5 |
| taper 164 | 1.250″ for 11″ then st. taper to .900″ at 32″ |
32 |
8.37 |
1.25 |
| taper 165 | 1.365 for 5″ then st. taper to 1.125″ at 32″ |
32 |
10.46 |
1.5 |
| taper 166 | 1.200″ for 6″ then st. taper to .800″ at 30″ |
30 |
6.53 |
1.25 |
| taper 167 | 1.450″ for 6″ then st. taper to .900″ at 40″ |
40 |
12.27 |
1.5 |
| taper 168 | 1.300″ for 6″ then st. taper to .950″ at 36″ |
36 |
9.75 |
1.5 |
| taper 169 | 1.250″ for 3″ then st. taper to .930″ at 26″ (.902″ at 28″) MTU taper (see taper 228, 185, 244) |
28 |
6.77 |
1.25 |
| taper 170 | 1.350″ for 5″ then straight taper to 1.200″ at 30″ |
30 |
10.18 |
1.5 |
| taper 171 | 1.600″ for 4″ then st. taper to 1.250″ at 30″ |
30 |
13.10 |
1.75 |
| taper 172 | 1.250″ for 5″ then st. taper to 1.000″ at 33″ |
33 |
8.73 |
1.25 |
| taper 173 | 1.450″ for 12″ then st. taper to 1.380″ at 28″ |
28 |
11.84 |
1.5 |
| taper 174 | 1.200″ for 3″ then st. taper to .605″ at 28″ (.700″ at 24″) |
28 |
4.93 |
1.25 |
| taper 175 | 1.450″ for 12.0″ then st. taper to 1.0″ at 28″ | 28 | 10.16 | 1.5 |
| taper 176 | 1.450″ for 5.0″ then st. taper to 1.250″ at 35.0″ | 35 | 13.43 | 1.5 |
| taper 177 | 1.200″ for 5.0″ then st. taper to .817″ at 28″ | 28 | 13.43 | 1.25 |
| taper 178 | 1.200″ for 5.0″ then st. taper to .814 at 28″ | 28 | 6.1 | 1.25 |
| taper 179 | 1.250″ for 4.0″ then st. taper to 1.012″ at 33″ | 33 | 8.75 | 1.25 |
| taper 180 | 1.250″ for 6″ then st. taper to 1.125″ at 30″ | 30 | 8.76 | 1.25 |
| taper 181 | 1.500″ for 7.0″ then st. taper to 1.325″ at 34.0″ | 34 | 10.8 | 1.5 |
| taper 182 | 1.200″ for 12.0″ then st. taper to .800″ at 28.0″ | 28 | 6.3 | 1.25 |
| taper 183 | .940″ for 2.5″ then st. taper to .566″ at 24.0″ | 24 | 2.68 | 1 |
| taper 184 | 1.450″ for 10.0″ then st. taper to 1.000″ at 30.0″ | 30 | 10.52 | 1.5 |
| taper 185 | 1.250″ for 3.0″ then st. taper to .874″ at 30.0″ (MTU contour) | 30 | 6.85 | 1.25 |
| taper 186 | 1.450″ for 12.0″ then st. taper to 1.250″ at 35.0″ | 35 | 13.85 | 1.5 |
| taper 187 | 1.250″ for 5.0″ then st. taper to 1.0″ at 36.0″ | 36 | 9.49 | 1.25 |
| taper 188 | 1.380″ for 4.0″ then st. taper to 1.000″ at 28.0″ | 28 | 9.08 | 1.5 |
| taper 189 | 1.450″ for 5.0″ then st. taper to 1.297″ at 28.0″ | 28 | 11.12 | 1.5 |
| taper 190 | 1.950″ for 15.0″ then st. taper to 1.875″ at 40.0″ | 40 | 30.69 | 2.0 |
| taper 191 | 1.200″ for 5.0″ then st. taper .915″ at 28.0″ | 28 | 6.60 | 1.25 |
| taper 192 | 1.200″ for 2.5″ then st. taper to .900″ at 27″ | 28 | 6.27 | 1.25 |
| taper 193 | 1.455″ for 12.0″ then st. taper to 1.125″ at 32.0″ | 32 | 12.10 | 1.5 |
| taper 194 | 1.250″ for 5.0″ then st. taper to 1.0″ at 34″ | 34 | 9.17 | 1.25 |
| taper 195 | 1.450″ for 6.0″ then st. taper to 1.0″ at 34.0″ | 34 | 11.48 | 1.5 |
| taper 196 | 1.500″ for 6.5″ then st. taper to 1.0″ at 30.0″ | 30 | 10.84 | 1.5 |
| taper 197 | 1.200″ for 5.0″ then st. taper to .860″ at 30.0″ (M24 Contour) | 30 | 6.89 | 1.25 |
| taper 198 | 1.060″ for 2.5″ then st. taper to .998″ at 31.0″ | 31 | 6.65 | 1.25 |
| taper 199 | 1.350″ for 4.0″ then st. taper to .807″ at 28″ | 28 | 7.33 | 1.5 |
| taper 200 | 1.450″ for 8.0″ then st. taper to 1.0″ at 34.0″ | 34 | 11.74 | 1.5 |
| taper 201 | 1.250″ for 5.0″ then st. taper to 1.076″ at 32.0″ | 32 | 9.15 | 1.25 |
| taper 202 | 1.450″ for 5.0″ then st. taper to 1.0″ at 28.0″ | 28 | 9.34 | 1.5 |
| taper 203 | 1.460″ for 4.0″ then st. taper to 1.0″ at 28.0″ | 28 | 9.43 | 1.5 |
| taper 204 | 1.400″ for 7.0″ then st. taper to 1.0″ at 38.0″ | 38 | 12.21 | 1.5 |
| taper 205 | 1.300″ for 5.0″ then st. taper to 1.050″ at 31.0″ | 31 | 9.19 | 1.5 |
| taper 206 | 1.400″ for 7.0″ then st. taper to 1.0″ at 34.0″ | 34 | 11.01 | 1.5 |
| taper 207 | 1.200″ for 5.0″ then st. taper to .900″ at 30.0″ | 30.0 | 7.11 | 1.25 |
| taper 208 | 1.350″ for 4.5″ then st. taper to 1.050″ at 32.0″ | 32 | 9.95 | 1.5 |
| taper 209 | 1.450″ for 8.0″ then st. taper to 1.0″ at 38.0″ | 38 | 13.0 | 1.5 |
| taper 210 | 1.450″ for 5.0″ then st. taper to 1.0″ at 32.0″ | 32 | 10.72 | 1.5 |
| taper 211 | 1.175″ for 5.0″ then st. taper to 1.0″ at 30.0″ | 30 | 7.46 | 1.25 |
| taper 212 | 1.050″ for 2.5″ then st. taper to 868″ at 28.0″ | 28 | 5.23 | 1.25 |
| taper 213 | 1.250″ for 4.0″ then st. taper to .708″ 30″ | 30 | 6.41 | 1.25 |
| taper 214 | 1.250″ for 2.5″ then st. taper to .920″ at 28.0″ | 28 | 7.43 | 1.50 |
| taper 215 | 1.550″ for 10.0″ then st. taper to 1.450″ at 34.0″ | 34 | 16.21 | 1.75 |
| taper 216 | 1.300″ for 5.0″ then st. taper to .950″ at 32.0″ | 32 | 8.82 | 1.5 |
| taper 217 | 1.350″ for 6.0″ then st. taper to 1.250″ at 38.0″ | 38 | 13.21 | 1.5 |
| taper 218 | 1.350″ for 7.250″ then st. taper to 1.125″ at 32.0″ | 32 | 10.34 | 1.5 |
| taper 219 | 1.450″ for 8″ then st. taper to 1.350″ at 38″ | 38 | 15.56 | 1.5 |
| taper 220 | 1.020″ for 4.0″ then st. taper to .730″ at 28″ | 28 | 4.44 | 1.25 |
| taper 221 | 1.050″ for 2.5″ then st. taper to .946″ at 31.0″ | 31 | 6.25 | 1.25 |
| taper 222 | 1.250″ for 3.0″ then st. taper to .819″ at 34.0″ | 34 | 7.77 | 1.25 |
| taper 223 | 1.060″ for 4.0″ then st. taper to .900″ at 30.0″ | 30 | 6.53 | 1.25 |
| taper 224 | 1.060″ for 4.0″ then st. taper to .757″ at 28.0″ | 28 | 5.42 | 1.25 |
| taper 225 | 1.300″ for 4.0″ then st. taper to 1.200″ at 30.0″ | 30 | 9.73 | 1.5 |
| taper 226 | 1.050″ for 4.0″ then st. taper to .640″ at 28.0″ | 28 | 4.26 | 1.25 |
| taper 227 | 1.330″ for 33.0″ then st. taper to 1.000″ at 33.0″ | 33 | 9.77 | 1.5 |
| taper 228 | 1.250″ for 3.0″ then st. taper to .957″ at 24.0″ (MTU contour) | 24 | 6.23 | 1.25 |
| taper 229 | 1.250″ for 4.0″ then st. taper to .720″ at 30.0″ | 30 | 7.10 | 1.25 |
| taper 230 | 1.200″ for 5.0″ then st. taper to .875″ at 30″ | 30 | 6.53 | 1.25 |
| taper 231 | 1.200″ for 5.0″ then st. taper to .941″ at 24″ (see taper 140) | 24 | 5.93 | 1.25 |
| taper 232 | 1.250″ for 4.0″ then st. taper to .719″ at 30.0″ (see taper 147) | 30 | 6.47 | 1.25 |
| taper 233 | 1.200″ for 2.5″ then st. taper to .807″ at 24″ | 24 | 5.15 | 1.25 |
| taper 234 | 1.100″ for 2.5″ then st. taper to .735″ at 30″ | 30 | 5.23 | 1.25 |
| taper 235 | 1.500″ for 10.0″ then st. taper to 1.350″ at 44″. | 44 | 20.27 | 1.5 |
| taper 236 | 1.060″ for 2.5″ then st. taper to .700″ at 28″ | 28 | 4.47 | 1.25 |
| taper 237 | 1.350″ for 8.0″ then st. taper to 1.100″ at 34″ | 34 | 11.18 | 1.5 |
| taper 238 | 1.450″ for 6.0″ then st. taper to 1.350″ at 36.0″ | 36 | 15.06 | 1.5 |
| taper 239 | 1.350″ for 6.0″ then st. taper to 1.250″ at 33.0″ | 33 | 11.83 | 1.5 |
| taper 240 | 1.450″ for 6.0″ then st. taper to 1.350″ at 38.0″ | 38 | 15.88 | 1.5 |
| taper 241 | 1.350″ for 4.0″ then st. taper to 1.250″ at 40″ | 40 | 14.25 | 1.5 |
| taper 242 | 1.250″ for 6.0″ then st. taper to .960″ at 36″ | 36 | 9.47 | 1.25 |
| taper 243 | 1.350″ for 12.0″ then st. taper to 1.000″ at 40.0″ | 40 | 12.62 | 1.5 |
| taper 244 | 1.250″ for 3.0″ then st. taper to .874″ at 32″ (MTU) | 32 | 7.68 | 1.25 |
| taper 245 | 1.350″ for 12.0″ then st. taper to 1.100″ at 44″ | 44 | 14.58 | 1.5 |
| taper 246 | 1.200″ for 4.0″ then st. taper to .835″ at 24″ | 24 | 5.40 | 1.25 |
| taper247 | 1.250″ for 3.0″ then st. taper to 1.120″ at 28″ | 28 | 8.23 | 1.25 |
| taper 248 | 1.350″ for 5.0″ then st. taper to .920″ at 32″ | 32 | 9.13 | 1.5 |
| taper 249 | 1.050″ for 2.5″ then st. taper to .600″ at 24″ | 24 | 3.93 | 1.25 |
| taper 250 | 1.350″ for 16.0″ then st. taper to 1.0″ at 44″ | 44 | 15.07 | 1.5 |
| taper 251 | 1.250″ for 3.0″ then st. taper to .955″ at 24″ | 24 | 6.22 | 1.25 |
| To place an order for one of these tapers use our designation in the left column. | ||||
| We can program for special tapers not listed here for a one-time $50 charge. | ||||
