Factory Contours
https://riflebarrels.com/shop/drop-in-barrels/cz-455-precision-barrel/The following is a listing of factory barrel contours that we have CNC lathe programs for. This is for centerfire rifles only.
Rimfire factory contours can be found on this page.
AR’s can be found on this page.
.50’s can be found on this page.
Special Straight Tapers can be found on this page.
We have CAD drawing files for most of the contours listed below available as a .pdf file. To see these files click on the blue designation in the left column.
| blank | weight | |||
| DESIG. | DESCRIPTION | length | pounds | dia. |
| Accuracy International | ||||
| AI300 | copy of Accuracy International 300 Win Mag st. taper fluted barrel 1.180″ dia. For 2.5″ then st. taper to .905″ at 24.625″ then .830″ dia. straight | 28 | 1.25 | |
| Adams & Bennett | ||||
| abf44 | Copy of F44 contour; .725″ dia. Muzzle at 28″, .974″ at radius tangent | 28 | 1.25 | |
| Bergara | ||||
| B14 | copy of a Bergara B14 in 6.5 Creedmoor. 1.240″ shank, .800″ at radius tangent, st taper to .650″ at 22″ | 24 | 3.20 | 1.25 |
| Beretta | ||||
| mato | copy of Beretta Mato 7mm Rem Mag 1.190″ dia. Shank, .820″ at radius tangent to .625″ at 24″ (.591″ at 28″) | 28 | 1.25 | |
| beretta | copy of 22-250 Beretta 1.125″ for 2.5″, .765″ at radius tangent, .613″ at 28″. Original is .630″ at 24″ | 28 | 3.41 | 1.25 |
| Blaser | ||||
| blaserr8 | copy of Blaser model R8 profile | 28 | 3.90 | 1.25 |
| Browning | ||||
| brownvmt | Browning Varmint taper, 1.175″ dia. shank 2.5″ long st. taper to .702″ at 28″ | 28 | 4.31 | 1.25 |
| brown2st | Browning/Belgium two step contour,1.175″ for 2.75″ then 5″ radius down to 1.000″ for 3″ them 5″ radius down to .870″ st. taper to .643″ at 28″ (original muzzle .680″ at OAL of 24″) | 28 | 3.74 | 1.25 |
| bxbolt | Browning X Bolt (original was 6.5 Creed) 1.165″ for 2.5″ then st. taper to .850″ over 3.0″, then st. taper to .730″ at 28″ (original was .725″ at 26″) | 28 | 4.04 | 1.25 |
| brwn2st2 | same as brown2st on line above except that .870″ dia. is .800 and original muzzle dia. was .590″ at 22″ original was 30-06 | 28 | 3.21 | 1.25 |
| brnxblt | Browning X Bolt (Original was 325 WSM) 1.165″ shank for 2.5″ then st. taper to .775″ at 6″, st taper to .567″ at 28″. (Original was .600″ at 24″) (Made for High Tech) | 28 | 3.11 | 1.25 |
| bar | Browning BAR contour,1.21″ for 2.5″. st. taper to .825″ over 3.9″ length, st. taper to .537″ at 28″ (.013″ per inch taper) | 28 | 3.31 | 1.25 |
| brown81L | Browning 81L contour ; 1.175″ for 2.5″, then radius to .710″, taper to .575″ at 22″ (.525″ at 28″) | 28 | 2.67 | 1.25 |
| abolt | Browning A-Bolt;1.180″ for 2.75″, 30″ R down to .805″ then st. taper to .600″ at 26″ (.578″ at 28″) | 28 | 3.17 | 1.25 |
| abolthor | Browning A-Bolt 22 Hornet; 1.180″ dia for 2.5″ then taper to .740″ over 4.5″ then st. taper to .515″ at 28″ (original was .560″ at a finish length of 22″) | 28 | 2.91 | 1.25 |
| Aboltvrm | Browning A-Bolt varmint contour: 1.175” for 2.5” then contour down to .900 over 1.5” to .900” Radius tangent dia. then st. taper to .720” at 28” (.750” at 24”) | |||
| b78 | Browning M. 78 1.175″ for 2.5″, radius over 1.5″ to 1.000″ at tangent then st. taper to .713″ at 28″ (original was .725″ at 26″) | 28 | 4.40 | 1.25 |
| see ‘special rimfire contours’ for listing of Browning factory rimfire contours | ||||
| Champlin | ||||
| champlin | copy of Champlin 25-06 contour: 1.150″ for 2″ then 11″ R over 2″ to .800″ dia. to .545″ over 22″, original 26″ finish length, our 29″ blank is 3.5″ of shank | 29 | 3.05 | 1.25 |
| Colt | ||||
| colt | copy of Colt bolt action .300 Wby Mag: 1.140″ for 3″ then taper to .800″ over 3.4″ then taper to .620″ at 24″ (.578″ at 28″) | 28 | 3.57 | 1.25 |
| Cooper Arms | ||||
| ca130 | Cooper Arms CA 130 contour 1.00″ for 4″ then st. taper to .640″ at 28″ (.700″ at 24″) | 28 | 3.85 | 1 |
| ca150 | Cooper Arms CA 150 barrel contour .940″ for 2.5″ then st. taper to .510″ at 28″ | 28 | 3.47 | 1 |
| ca160 | Cooper Arms CA 160 barrel contour .940″ for 2.5″ then st. taper to .565″ at 24″ | 24 | 3.10 | 1 |
| ca170 | Cooper Arms CA 170, 1.150″ shank, radius down to .865 then .630 at 27″ | 28 | 3.44 | 1.25 |
| ca180 | Cooper Arms CA 180, 1.100″ shank, radius down to .730″ then .567 at 28″ | 28 | 2.65 | 1.25 |
| ca190 | Cooper Arms CA 190, 1.180″ shank, taper down to .880″ then .652″ at 28″ | 28 | 3.72 | 1.25 |
| rf 24 | Cooper Varmint taper (CA220) .990″ for 3″ then st. taper to .750″ at 27″ | 28 | 4.42 | 1 |
| taper 91 | Cooper M. 22 Varmint 1.125″ for 4″ then st. taper to .750″ at 26″ (.716″ at 28″) (note: Cooper contour designations for chrome-moly steel start with CA1 and stainless steel start with CA2. Our designations all start with CA1 for either type of steel.) | 28 | 5.00 | 1.25 |
| CZ | ||||
| cz527 | copy of 7.62×59 CZ barrel (shop note: in rimfire file, same as rimfire contour) .980″ dia. Shank, .780″ dia. at radius tangent to .570″ at muzzle (original 22″ fin) | 24 | 2.23 | 1 |
| rf144 | copy of CZ barrel-.875″ for 2.5″ then st. taper to .750″ for 6.0″ then cylinder to 28″ | 28 | 3.08 | 1 |
| Dakota | ||||
| dakota1 | standard Dakota #1 contour with .532″ muzzle at 25.5″ | 28 | 2.57 | 1.25 |
| dakota2 | standard Dakota #2 contour with .557″ muzzle at 25.5″ | 28 | 2.77 | 1.25 |
| dakota3 | standard Dakota #3 contour with .607″ muzzle at 25.5″ | 28 | 3.14 | 1.25 |
| dakota4 | standard Dakota #4 contour with .632″ muzzle at 25.5″ | 28 | 3.32 | 1.25 |
| dakota5 | standard Dakota #5 contour with .682″ muzzle at 25.5″ | 28 | 3.70 | 1.25 |
| dakota6 | standard Dakota #6 contour with .732″ muzzle at 25.5″ | 28 | 4.14 | 1.25 |
| all of the above Dakota contours have a 1.200″ dia shank | ||||
| hatchet | Dakota Predator taper 1.150″ for 3″ then st. taper to .614″ at 28″ (.0214″/inch) | 28 | 4.63 | 1.25 |
| lilja4 | Dakota Light Predator; our standard #4 contour with 2.9″ of 1.150″ dia. Shank | 28 | 1.25 | |
| Desert Tech | ||||
| desert tech | 1.620″ for 7″ then 45º down to 1.250″ to muzzle | 34 | 12.45 | 1.75 |
| d_tech_43 | Same as above but for 43″ finish | 43 | 15.31 | 1.75 |
| Holland & Holland | ||||
| 300HH | copy of original .300 H&H barrel made by Holland & Holland: 1.200″ at chamber end .580″ at muzzle | 28 | 1.25 | |
| Harrington & Richardson | ||||
| hr17 | copy of H&R 17/223 contour, original shank dia. of 1.055″ for 2″, .665″ at radius tangent and muzzle dia. of .500″ at 20″. (our blank is .510″ at 28″ and 4″ shank) | 28 | 2.32 | 1.25 |
| hr222 | same as above but for 24″ blank | 24 | 1.25 | |
| Howa | ||||
| howasp | Copy of Howa Sporter contour, 1.175″ for 2.5″, taper to .750″ over 4″, then st taper to .556″ at 28″ (original is .610″ at 22″ finish length.) | 28 | 3.05 | 1.25 |
| howav | copy of Howa varmint taper: 1.175″ for 2.5″ then radius over 3.1″ down to .970″ then st. taper to .875″ at 24″ (.858″ at 28″) | 28 | 4.95 | 1.25 |
| Husqvarna | ||||
| husky | Husqvarna contour from a 22″ long 270 Win.: 1.090″ for 2.5″ (chuck grip) then st. taper to 1.050″ over 2.2″ then st. taper to .950″ over 2.375″ then st. taper to .745″ over 2.750″ then st. taper to .548″ at 28″ (original was .590″ at 22″ finish length) (also same as FFV Sports 22-250) | 28 | 3.22 | 1.25 |
| husky2 | Husqvarna contour from a 20.7″ long 243 Winch.: 1.100″ for 3.5″ (chuck grip) then st. taper to .950″ over 1″ then st. taper to .780″ over 3″ then st. taper to .710″ over | 28 | 2.90 | 1.25 |
| Interarms | ||||
| minim | copy of Mini Mauser .223 .555″ muzzle dia. At 20″, 1.025″ dia shank, .790″ at radius tangent (blank is .510″ at 28″) | 28 | 2.59 | 1.25 |
| Ithaca | ||||
| ithaca | Ithaca/ ‘made in Finland’ 22-250 original, 1.070″ dia. shank with large radius down to .685″ dia.over a 10.75″ length, original muzzle .635″ at 22.75″ (.610″ at 28″) | 28 | 3.13 | 1.25 |
| Kimber | ||||
| kimberFN | Kimber M. 84 varmint contour, original was a .17/221 with muzzle dia. of .680″ at 22″, .950″ dia. shank and 13″ radius over 1.5″ dropping to .810″ dia | 28 | 2.92 | 1 |
| kimvrmt | Kimber varmint taper: 1.050″ for 3.5″ st. taper to .685″ at 26″ (.653″ at 28″) | 28 | 4.18 | 1.25 |
| kimma | Kimber Mountain Ascent in 6.5 Creedmoor. 1.050″ for 3.0″, .700″ at radius tangent, .560″ muzzle diameter at 22″ finish length. (.550″ at 24″ | 24 | 2.39 | 1.25 |
| kim84m | Kimber M. 84M 1.050″ for 2.75″ then radius over 2.75″ to .710″ then st. taper .565″ at 22″ (.512″ at 28″, .0088″/inch) | 28 | 2.34 | 1.25 |
| K84m24 | Kimber 84M but for a 24″ blank | 24 | 2.23 | 1.25 |
| mod84m | modified version of km84m above making the muzzle diameter .617″ at 22″ other dimensions remain the same (.583″ at 28″) | 28 | 2.55 | 1.25 |
| kim84 | Kimber .223 varmint taper: .965″ for 2.5″ then st. taper to .609″ at 28″ original was .665″ at 24″ | 28 | 3.69 | 1 |
| kim375 |
Kimber 375 H&H, 1.250″ for 3.5″, then st. taper to .900″ at 5.0″, then st. taper to .660″ at 28″ (original was .700″ at 24″) | 28 | 4.13 | 1.25 |
| kimoc | Kimber Open Country, 1.045″ for 4.0″ then st. taper to .830″ at 28″. (Original was .860″ at 24″ and Fluted) | 28 | 5.07 | 1.25 |
| kim84ahl | Kimber 8400 with 1.300″ dia. shank | 28 | 3.66 | 1.5 |
| kimclass | 1.260″ dia. for 2.5″ then 1.125″ dia. for 1.875″ then radius down to .805 then st. taper down to .530″ at 28″ (muzzle dia. of .560″ at 24″ from Classic model 30-06) | 28 | 2.55 | 1.25 |
| kim8400 | 1.260″ dia. For 2.5″ then 1.125″ dia. for 1.125″ then radius down to .805 then st. taper down to .530″ at 28″ (muzzle dia. of .560″ at 24″) Copy of Kimber Model 8400 Montana 300 WSM | 28 | 3.32 | 1.25 |
| mod8400 | modified version of Kim8400 above making muzzle diameter .617″ at 24″ (all other dimensions remain the same.) | 28 | 3.96 | 1.25 |
| khornet | copy of Kimber of Oregon 22 Hornet .970″ at shank, .760″ at tangent, .561 at 28″ | 28 | 3.10 | 1 |
| kimfwt | copy of Kimber of Oregon featherweight type contour, original is 30-06 w/ .550″ muzzle at 22″ | 28 | 3.35 | 1.25 |
| kim338 | copy of Kimber of Oregon .338 Win Mag 1.225″ for 2.5″ then radius over 3.5″ to .760″ then st. taper to .575″ at 28″ (original .575″ at 24″) | 28 | 3.08 | 1.25 |
| taper 127 | 1.140″ for 4″ then st. taper to .593″ at 28″ (copy of Kimber 204 taper original is .685″ at 22.5″) | 28 | 4.59 | 1.25 |
| provarm | 1.045″ for 3″ then radius down to .850″ over 1″ then .850″ dia. To muzzle | 28 | 4.08 | 1.25 |
| kim84L | Kimber M. 84 L contour: 1.050″ for 3.5″ then radius over 2.75″ to .700″ dia. then st. taper to .560″ at 24″ (.532″ at 28″) | 28 | 2.48 | 1.25 |
| modk84L | Modified 84L contour, .631″ diameter at 24″, everything else stays the same. | 28 | 2.75 | 1.25 |
| Mannlicher-Schoenauer | ||||
| mscarbin | Copy of carbine contour; 1.140″ dia. Shank, 1″ radius down to .925″ tapering to .820″ over 1.790″ then drop to .755″ and then st. taper to .595″ at 21″ (.527″ at 28″) | 28 | 2.71 | 1.25 |
| Marlin | ||||
| marlin | .935″ for 4″ then st. taper to .700″ over 6.5″ then st. taper to .650″ at 20.5″ (.620″ at 28″) original off Marlin lever rifle | 28 | 2.78 | 1 |
| marlXL7 | copy of Marlin model XL7, original 270 Win W/ barrel nut. 1.075″ for 3.0″ then st. taper to .775 over 8.5″, then st. taper to .560″ at 28″. (original .600″ at 22″) | 28 | 3.44 | 1.25 |
| m1895SBL | copy of original Marlin model 1895 in .45-70 caliber | 24 | 1 | |
| marl322 | Copy of a Marlin model 322 chambered in 222 Rem. | 28 | 4.23 | 1.25 |
| Mauser | ||||
| Mauser | copy of Mauser | |||
| Maus28 | Copy of Mauser in 28″ length | 28 | 3.57 | |
| Montana Rifle Company | 28 | 3.95 | 1.25 | |
| MRC375 | copy of MRC .375 H&H contour: 1.200″ for 3″ then radius down to .940″ over 2.4″ then st. taper to .705″ at 21″ (.609″ at 28″) | |||
| Remington | ||||
| remmag28 | Remington mag contour w/2.5″ long shank x 1.250″ .609″ muzzle dia. at 28″ this contour is the same as the LVSF (light varmint stainless fluted – .657″ at 22″) original Remington barrel is .640″ at 24″ | 28 | 3.67 | 1.25 |
| remmag30 | same as remmag28 above but with 30″ finish length, .589″ dia. at 30″ | 30 | 3.79 | 1.25 |
| remsport | Remington sporter contour (non-mag) with 2.5″ long shank x 1.200″, .630″ muzzle original Remington barrel is .645″ at 22″, .630″ at 28″ | 28 | 3.31 | 1.25 |
| remsp30 | Remington sporter contour above but 30″ blank length, .620″ dia. at 30″ | 30 | 3.49 | 1.25 |
| rem06 | Remington sporter contour same as 22″ long 30-06; .590″ at 22″, .760″ at tangent, 1.200″ shank, blank muzzle dia. = .543″ (this is the original Rem contour not the rem06r shown below) | 28 | 3.14 | 1.25 |
| rem06r | same as rem06 above but with 100″ radius between .760″ dia. and 1.200″ dia. rem06 above is a straight line between these two points not a radius | 28 | 3.06 | 1.25 |
| sendaro | Remington Sendaro / Varmint contour with .820″ muzzle dia. At 28″ | 28 | 5.15 | 1.25 |
| send050 | same as Sendaro but -.050″ in diameter except shank stays 1.250″ | 28 | 1.25 | |
| sendar30 | Remington Sendaro / Varmint contour to .810″ at 30″ | 30 | 5.05 | 1.25 |
| sendar32 | Remington Sendaro / Varmint contour to .800″ at 32″ | 32 | 1.25 | |
| sendar34 | Remington Sendaro / varmint contour to .798″ at 34″ | 34 | 1.25 | |
| romsen32 | same as sendar32 but with .825″ muzzle at 32″ finish | 32 | 1.25 | |
| rem721 | copy of Remington 721 contour with hump (.605″ at 22.75″) .566″ at 28″ blank, 1.200″ shank | 28 | 3.32 | 1.25 |
| Copy of a RemMtn contour, finish at 24″ with a muzzle dia. of .515″ shank length is 2.50″ of 1.200″ dia. | 28 | 3.19 | 1.25 | |
| rem600 | Rem 600 contour, original was 18.5″ long with .610″ muzzle and .850″ at radius tangent, our blank has 5.75″ of 1.250″ dia. shank and muzzle dia. Of .510″ | 28 | 4.26 | 1.25 |
| rem72130 | same as rem721 above but extended to a 30″ length | 30 | 3.41 | 1.25 |
| rem788 | Remington 788, original was a .223 24″ long with a muzzle dia. Of .575″ | 28 | 3.01 | 1.25 |
| and 1.125″ dia. Shank with .745″ at radius tangent | ||||
| rem750 | copy of Remington 750 (semi-auto) .270: 1.170″ dia. Shank. .830″ at radius tangent, .650″ at original length of 22″ | 28 | 3.31 | 1.25 |
| remks | Copy of Rem KS, Similar to RemMtn24, with .600″ Muzzle diameter | 28 | 3.40 | 1.25 |
| rcs300 | Custom Shop .300 Wby, taper from 1.250″ dia. over 4.75″ to .760″ then taper to .645″ at 28″, original was .660″ at 24″ | 28 | 3.56 | 1.25 |
| see ‘special rimfire contours’ for listing of Remington factory rimfire contours | ||||
| Ruger | ||||
| 1rug560m | Ruger #1 contour with 1.160″ dia. Shank, turn to .509 muzzle at 28″, .582″ at 20″, .560″ at 22″, .750″ at tangent point, similar to 77int shown below but radius section is 1″ longer on this profile | 28 | 2.80 | 1.25 |
| rugeramerican | Copy of Ruger American, 1.155″ for 2.750″ radius of 45.0″ to .800″ and straight taper to .510″ at 28″ (original was .585″ at 22″) | 28 | 2.97 | 1.25 |
| rugerspt | Ruger 77 sporter contour,1.150″ for 4″ then radius over 3.5″ down to .750″ then st. taper to .520″ at 28″ (.542″ at 26″, .564″ at 24″, .586″ at 22″) (also used on Hawkeye in smaller cartridges) | 28 | 3.01 | 1.25 |
| rugerp | Ruger sporter contour w/ 3.5″ of 1.170″ dia. .770″ at radius tangent, .515″ at 28″ used on Ruger #1’s chambered for .243 and similar sized cartridges & M.77’s .550″ at 24″ (.012″ / inch) | 28 | 2.95 | 1.25 |
| rugerprs | Ruger Precision rifle w/ 1.200″ for 2.5″ then step down to 1.0″ and straight taper to .750″ at 28.0″ | 28 | 4.56 | 1.25 |
| rugermag | Ruger Magnum contour with .555″ muzzle dia., .900″ at radius tangent, 1.160″ diameter shank | 28 | 3.33 | 1.25 |
| rugervmt | Ruger Varmint/Tactical 1.160″ for 3.5″ with .755″ muzzle at 24″ (.720″ at 28″) .935″ at radius tangent | 28 | 4.32 | 1.25 |
| rgrvmt30 | same as rugervmt but with a 30″ long finish length (.700″ at 30″) | 30 | 4.42 | 1.25 |
| 30ruger1 | Ruger #1 heavy contour muzzle dia. .600″ at 30″, .900″ at radius tangent | 30 | 3.87 | 1.25 |
| ruger1 | Ruger #1 contour 1.200″ for 2.75″ with .620″ muzzle at 26″ (.594″ at 28″) .900″ at radius tangent | 28 | 3.61 | 1.25 |
| taper 18 | Ruger #1: 1.200″ for 4″ then st. taper to .800″ at 26″ (.836″ at 24″, .732 at 28″) used on Ruger #1’s chambered for .416 Rigby, .458 Win & .458 Lott | 28 | 5.79 | 1.25 |
| ruger3 | 1.150″ for 2.5″ then radius over 4″ to .775″ at radius tangent then st. taper to .602″ at 28″ (original .650″ at 22″) used on Ruger #3 22 Hornet | 28 | 3.07 | 1.25 |
| hawk338 | Copy of Ruger Hawkeye in 338 Mag: 1.160″ dia. shank .900″ at radius tangent st. taper to .625″ dia. muzzle at 24″ (.573″ at 28″) | 28 | 3.52 | 1.25 |
| hawk358 | Copy of Ruger Hawkeye 358 Win 1.160″ shank, .760 radius tangent to .610″ at 28″ original was .650″ at 22″ | 28 | 3.10 | 1.25 |
| hawk375 | Copy of Ruger Hawkeye .375: 1.160″ for 3″ then radius down to .875″ dia. then straight taper to muzzle dia. of .637″ at 28″ (original was .675″ at 24″) | 28 | 3.63 | 1.25 |
| 77int | copy of Ruger 77 International Mannlicher contour: 1.160″ with radius over 2.75″ .750″ at radius tangent then st. taper to .510″ at muzzle (original was 18.25″ long) see 1rug560m above | 28 | 2.61 | 1.25 |
| ruger458 | copy of M. 77 .458 Win Mag contour: 1.155″ for 4″ then st. taper to .975″ over 4″ then st. taper to .810″ at 24″ (.777″ at 29″) | 28 | 4.13 | 1.25 |
| rugergs | copy of Ruger Gunsite Scout Rifle contour | 24 | 3.58 | 1.25 |
| taper162 | copy of straight taper Ruger Varmint taper 32″ long | 32 | 5.74 | 1.25 |
| see ‘special rimfire contours’ for listing of Ruger factory rimfire contours | ||||
| Sako | ||||
| sako223 | Sako contour 1.035″ shank for 2.5″ to .565″ at 28″, .750″ at radius tangent original .590″ at 22.5″ | 28 | 2.58 | 1.25 |
| sakosptr | Sako contour 1.115″ shank for 3.5″ to .608″ at 28″,.770″ at radius tangent original .630″ at 22.5″, also used on Sako M. 85 .270 WSM fluted | 28 | 3.16 | 1.25 |
| sakomag | Sako contour 1.160″ dia. shank for 2.5″ taper over 3.5″ to .818″ at radius tangent .616″ at 28″ | 28 | 3.32 | 1.25 |
| sakovrmt | Sako contour 1.120″ shank for 2.5″ to .853″ at 28″, .885″ at radius tangent | 28 | 4.55 | 1.25 |
| taper 26 | Sako varmint contour for the 17 Remington 1.050″ for 3″ then st. taper to .700″ at 28″ (.756″ at 24″) | 28 | 4.35 | 1.25 |
| sako17 | Sako Varmint contour from 17 Rem (different than taper 26 above) 1.035″ for 2.5″ then taper to .875″ over 3.25″ then st. taper to .865″ at 23.62 OAL (.862″ dia. At 28″ blank length) | 28 | 4.29 | 1.25 |
| sako461 | Sako461 contour. 1.050″ for 2.5″ then radius over 1.5″ to .670″ then st. taper to .565″ at 24″ (original .625″ at 18″) | 24 | 2.31 | 1.25 |
| vixen | 1.040″ for 2.5″ then st. taper to .719″ at 28″ (original 1.040″ then st. taper to .750″ at 23.6″ | 28 | 4.33 | 1.25 |
| sakofl | Sako fluted barrel; original was 270 Win w/ 21″ fin length muzzle dia. .595″ 1.125″ for 2.75″ then .840″ at radius tangent, st. taper to .525″ at 28″ | 28 | 3.06 | 1.25 |
| sako270 | 1.160″ for 2.5″ then taper down to .900″ over 3″ then st. taper to .533″ at 28″ original was 270 Win. W/ 2″ of 1.160″ shank and muzzle dia. .588″ at 24.3″ | 28 | 3.37 | 1.25 |
| forester | 1.085″ for 2.5″ then st. taper to .755″ at tangent then st. taper to .560″ at 28″ original had muzzle dia. of .590″ at 23″ and was 22-250 | 28 | 2.71 | 1.25 |
| finnbear | 1.160″ for 2.5″ then st. taper to .780″ at tangent, then st. taper to .588″ at 28.0″ | 28 | 3.36 | 1.25 |
| forestvm | 1.085″ for 2.5″ then st. taper to .750″ at 26.5″ (.729″ at 28″) | 28 | 4.67 | 1.25 |
| rf 74 | 1.035″ dia. for 3″ then st. taper to .860″ at 27″ (.853″ at 28″) | 28 | 5.24 | 1.25 |
| same as Sako 222 Rem varmint w/ muzzle dia. of .860″ at 23.6″ | ||||
| sako220 | copy of Sako 220 Swift contour; 1.110″ for 2.5″ then taper over 2.1″ to .820″ then taper over 19.5″ to .635″ (original .635″ at 23″) .598″ at 28″ | 28 | 3.09 | 1.25 |
| trg | TRG contour; 1.155″ dia. shank tapering down to .873″ over 6″ then st. taper to .863″ at 28″ (original was .865″ at 24″) | 28 | 4.68 | 1.25 |
| see ‘special rimfire contours’ for listing of Sako factory rimfire contours | ||||
| Savage | ||||
| savvrmt | Savage Varmint taper 1.065″ dia. shank for 2.5″ st. taper to .790″ at 28″(very similar to taper 20 shown at the end of this Savage listing) | 28 | 4.83 | 1.25 |
| savedge | Savage Edge 223 Rem 1.040″ dia shank for 3.0″ then st, taper to .750″ over 5″, then taper to .570″ at 24″ | 24 | 3.16 | 1.25 |
| sav116 | Savage M. 116 -1.060″ for 2.5″ then st. taper to .845″ dia. at 12.5″ then st. taper to .810″ dia. at 24″ (.798″ dia. at 28″ blank length) | 28 | 4.28 | 1.25 |
| sav166-338 | Savage M 116 338 Win Mag – 1.030″ for 2.5″ then st. taper to .760″ over 5.0″ then st. taper to .725″ at 28″ | 28 | 3.27 | 1.25 |
| sav340 | copy of Savage model 340 barrel; .875″ for 3″ then st. taper to .600″ at 24″ .550″ at 28″ blank length | 28 | 2.72 | 1 |
| savbmag | Copy of Savage B-Mag 17 Win Super Mag .860″ for 2.5″ then st. taper to .800″ at 7.0″, straight .800″ to muzzle” | 24″ | 3.50 | 1 |
| xp 10 | copy of Savage model 516 contour except shank dia. is 1.065″ for 2.5″ and OAL is 15″, muzzle dia. is .725″ (original Savage was 12.3″ OAL) | 15 | 2.08 | 1.25 |
| sav250 | 1.020″ for 3″ then radius to .735″ at radius tangent then st. taper to .605 at 22″ .557″ at 28″ (copy of Savage 99) | 28 | 2.55 | 1.25 |
| sav111 | Savage model 111 original was .243 Win 1.050″ for 2.5″ then taper to .790″ over5″ then taper to .750″ over 1.5″ then taper to .555″ at original length of 22″ muzzle dia. On 28″ blank is .510″ | 28 | 2.79 | 1.25 |
| taper153 | Copy of Savage 110 338 Lapua – 1.125″ for 4.0″ then st. taper to .900″ at 30.0″ | 30 | 6.28 | 1.25 |
| sav11032 | Copy of Savage 110 338 Lapua, but in a 32″ Finish | 32 | 6.34 | 1.25 |
| sav111g | same as sav111 above but muzzle dia. changed to .650″ at 22″ (28″ blank is .625″ | 28 | 3.09 | 1.25 |
| taper 82 | Savage M. 12 1.200″ for 3″ then st. taper to 1.008″ at 26″ (.992″ at 28″) | 28 | 6.89 | 1.25 |
| sav16 | Savage M. 16 1.115″ for 2.5″ then 45º drop down to 1.035″ then st. taper to .755″ then st. taper to .596″ at 28″ (original was .620″ at 24″ & chambered .300 WSM) | 28 | 3.09 | 1.25 |
| sav99f | Copy of Savage model 99F with rear site hump; 1.020″ dia. Shank, drop down to .750″ dia over 3″ then .855″ dia. Hump that is .700″ long, down to .700″ then st. taper to .570″ dia. at original length of 22″ (.542″ at 28″) | 28 | 2.54 | 1.25 |
| taper 151 | copy of Savage M. 12 F/TR 1.125″ for 2.5″ then st. taper to .985″ at 30″ | 30 | 6.71 | 1.25 |
| savm25 | Copy of Savage M 25, (orig was 17 Hornet). .975″ for 2.5″ then st. taper to .700″ x 24″ | 24 | 3.63 | 1 |
| savm14 | copy of Savage Model 14: 1.125″ for 2.5″ then 45º chamfer to 1.035″ then st. taper to .760″ then st. taper to .710″ at 26″ | 28 | 3.44 | 1.25 |
| Some of our straight taper profiles will also work on the Savage actions using a 1.050″ – 1.062″ and 1.125″ dia. shanks with the Savage barrel nut. These would include: Taper 20, 26, 79, 107, 124, 151, 153 | ||||
| Springfield | ||||
| springfield03 | Copy of Springfield03 | 28 | 3.48 | 1.25 |
| Stevens | ||||
| 110esk | copy of Stevens model 110E series K, original was 30-06 | 28 | 2.73 | 1.25 |
| Tikka | ||||
| tikka595 | Tikka M. 595 contour 1.085″ for 3″ then down to .563″ at 28″, .820″ at radius tangent, original .630″ at 22.5″ | 28 | 3.30 | 1.25 |
| tikkaT3 | copy of Tikka T3; 1.130″ dia. Shank, taper over 3.5″ down to .760″ then st. taper to .604″ at 28″ (original was .625″ at 24″) | 28 | 3.03 | 1.25 |
| 595cont | Tikka model 595 Continental varmint profile; 1.120″ dia. shank for 2.5″ the taper over 7″ to .810″ then taper to .785″ at muzzle | 28 | 4.07 | 1.25 |
| Thompson/Center | ||||
| venture | T/C Venture model barrel original was .650″ at 24″ | 28 | 3.06 | 1.25 |
| Type 99 | ||||
| 99arisaka | Copy of a Model 99 Arisaka 7.7 Jap | 28 | 3.05 | 1.25 |
| Weatherby | ||||
| wby1 | Weatherby #1 contour 1.150″ for 2.5″ down to .730″ | 28 | 2.59 | 1.25 |
| then .009″ per inch taper to .520″ at 28″ (original .550″ at 24″) | ||||
| used on various models including Alaskan | ||||
| wby2 | Weatherby #2 contour with .600 muzzle dia. , 1.200″ dia. Shank for 3″ | 28 | 3.32 | 1.25 |
| .790″ at tangent (original .600″ at 26″) | ||||
| wby3 | Weatherby #3 contour, 1.200″ dia. for 2.5″, .830″ at tangent, .626″ at 28″(original .640″ at 26″) | 28 | 3.54 | 1.25 |
| wby4 | Weatherby #4 contour, 1.225″ dia. for 3″, 1.045″ at tangent, .816″ at 28″(original .816″ at 26″) | 28 | 5.30 | 1.25 |
| wby2x30 | Weatherby #2 contour with .575″ muzzle at 30″, 1.200″ dia. shank | 30 | 3.36 | 1.25 |
| wby378 | Weatherby contour used on fluted 30/378 and 338/378 rifles by Weatherby1.250″ dia for 3″ then taper to .900″ over 2″ then taper to .700″ at 26″ (.687@28) similar to our #5 contour | 28 | 4.10 | 1.25 |
| wby300 | Weatherby contour used on fluted 300 barrels by weatherby. 1.200″ for 3.0″ then straight taper to .900″ over 2.0″ then straight taper to .695″ at 28″ | 28 | 4.05 | 1.25 |
| 378W30 | same as wby378 contour above but for a 30″ finish length, muzzle .670″ at 30″ | 30 | 4.29 | 1.25 |
| wvang | Copy of Weatherby Vanguard contour 1.200″ dia. taper to .785″ dia. over 3.3″ then st. taper to .582″ at 28″ (original .620″ at 24″) | 28 | 3.18 | 1.25 |
| wvang30 | Copy of Weatherby Vanguard but for a 30″ finish. | 30 | 3.40 | 1.25 |
| mkvul | Mk V ultra light contour, 1.090″ dia. Shank taper to .750″ over 2.5″ then st taper to.550″ at 26″ (.520″ at 28″) | 28 | 2.56 | 1.25 |
| Whitworth | ||||
| whitwort | Copy of Whitworth .458 barrel 1.220″ at chamber for 3.0″ then st. taper over 5″ to .880″ then st. taper to .670″ at 23.5″ (.630″ at 28″) | 28 | 4.18 | 1.25 |
| Winchester | ||||
| win70mag | Win. M. 70 mag contour w/1.200″ shank to .565″ muzzle, .800″ at radius tangent (original .580″ at 26″) also same as new style M. 70 30-06 except that shank is 1.150″ | 28 | 3.32 | 1.25 |
| winvrmt | Win. Model 70 Varmint 223 Rem 1.135″ for 3.0″ then st. taper to .950″ over 1.5″ then st. taper to .677 at 28″ (Original .700″ at 26″) | 28 | 4.10 | 1.25 |
| 70mag30 | similar to win70mag above except 30″ blank length with muzzle dia. of .545″ at 30″ | 30 | 3.37 | 1.25 |
| 70sa308 | Win M. 70 SA (original in 308 Win) also same as M. 70 XTR Sporter & M. 70 7mm WSM 1.135″ for 2.5″ then st. taper to .800″ over 4″, st. taper to .585″ at 24″(.543″ at 28″) | 28 | 3.07 | 1.25 |
| winfwt26 | Winchester Featherweight contour to .531″ at 26″ and 2.5″ long 1.200″ shank (.30 caliber maximum in this contour) | 26 | 2.84 | 1.25 |
| winfwt05 | same as winfwt26 above except that muzzle dia. is .550″ at 20″(winfwt26 is .595″ at 20″) | 26 | 2.78 | 1.25 |
| winm94 | Winchester M. 94 contour with .940″ dia. shank to .587″ muzzle dia. | 26 | 2.08 | 1.25 |
| win375 | Win M. 70 375 H&H factory contour + .020″, 3″ of 1.150″ to .672″ at 28″(.720″ at 24″) .950″ at radius tangent, .012″ taper per inch | 28 | 1.25 | |
| win375b | Win M. 70 375 H&H factory post ’64 contour, 1.220″ for 2.5″ tapering to .950″ over 1.62″ then st. taper to muzzle of .670″ at 28″ (original was .720″ at 24″) | 28 | 4.08 | 1.25 |
| win375c | Win M. 70 375 H&H factory post ’64 contour, 1.300″ for 4″ tapering to 1.050″ over 2.5″ then st. taper to muzzle of .792″ at 28″ (original was .840″ at 24″) | 28 | 4.08 | 1.25 |
| 375win64 | Win M. 70 pre ’64 375 H&H Mag;1.250″ for 2.75″ radius down to .950″ at tangent then st. taper to .653″ at 28″ (original was .685″ at 25″) | 28 | 4.19 | 1.25 |
| 6470nsh | Win M. 70 Pre-64 without rear sight hump. All other dimensions the same. | 28 | 3.10 | 1.25 |
| pre6470 | Win M. 70 copy of pre-64 contour with rear site hump, .600″ at 24″ (.557″ at 28″)1.150″ dia. Shank | 28 | 3.09 | 1.25 |
| mod6470 | Modified Win. M70 with rear sight hump, changing muzzle diameter to .700″ at 24″. Everything else stays same. | 28 | 3.09 | 1.25 |
| win70pre | Win. M 70 pre-64 USMC Sniper Contour original .790 at 24″ | 28 | 4.82 | 1.25 |
| laredo | Win Laredo contour 1.135″ for 3″, .945″ at radius tangent then st. taper to .785″ at 28″, original was .800″ at 26″ | 28 | 4.46 | 1.25 |
| win70ew | Copy of a Winchester Model 70 Extreme Weather. 1.150″ dia shank, taper to .800″ over 4.0″, then st taper to .571″ at 28″ (Original is .625″ at 23″) | 28 | 3.25 | 1.25 |
| laredo_b | same as Laredo but muzzle dia. is .825″ at 26″ | 28 | 4.58 | 1.25 |
| winsptr | Win Sporter contour 1.135″ shank for 3″, .950″ at radius tangent, then st. taper to .680″ at 28″ (original 700 at 26″) | 28 | 4.06 | 1.25 |
| laredo30 | same as Laredo but for a 30″ finish length (.770″ at 30″) | 30 | 4.67 | 1.25 |
| wssm | Win 243 WSSM contour 1.150″ dia. shank, .755 at radius tangent, .540″ muzzle dia. at 22″ on original | 28 | 2.88 | 1.25 |
| wssm24 | Above contour for a 24″ blank | 24 | 1.25 | |
| 223wssm | Win 223 WSSM varmint contour; 1.155″ for 2.5″, .875″ at radius tangent, .740″ at 24″ (.720″ at 28″ blank length) | 28 | 3.85 | 1.25 |
| win225 | Win varmint 225 contour 1.125″ for 2.5″ then taper over 4″ to 1.010″ then straight taper to .740″ at 28″ (original was .785″ at 24″) This contour also used on pre-64 30-06 target barrels | 28 | 4.70 | 1.25 |
| taper 15 | copy of Winchester Highwall 1.200″ for 2.5″ then st. taper to .900″ at 30″ | 30 | 6.78 | 1.25 |
| taper 79 | copy of Winchester Highwall 1.050″ for 2.5″ then st. taper to .900″ at 30″ | 30 | 5.66 | 1.25 |
| taper 107 | Copy of Win. Low wall 1.050″ for 3″ then st. taper to .600″ at 24″ (.515″ at 28″) | 28 | 3.59 | 1.25 |
| steal2 | copy of Stealth II contour: 1.150″ for 3″ then taper to 1.000″ over 2.5″ then st. taper to .875″ at 26″ (.860″ at 28″) | 28 | 5.16 | 1.25 |
| steal30 | same as stealth2 above but for 30″ long blank (.845″ dia. at 30″) | 30 | 5.43 | 1.25 |
| win1885 | copy of Winchester 1885 barrel profile; 1.175″ shank to .843″ at muzzle | 30 | 5.41 | 1.25 |
| m70sg | copy of Win. M. 70 Super Grade in .270; 1.150″ for 2.5″ then taper to .815″ over 3.6″ then taper to .566″ at 28″ (original was.595″ at 24″) | 28 | 3.19 | 1.25 |
| winsprg | Copy of Winchestor SPRG contour: 1.135″ for 2.5″ then st. taper to .800″ over 4.0″ then st. taper to .562″ at 28″ (.600″ at 24.5″) | 28 | 3.19 | 1.25 |
| To place an order for one of these contours please use the designation in the left hand column. | ||||
