.50 Caliber Precision Barrels

Pricing

Pricing for our .50 caliber barrels is listed below. These barrels are finished on the inside, turned to one of the contours shown below and finish ground to a 320 grit finish on the outside. Our standard finish length for .50's is 30". However we can make .50 caliber barrels up to 45" in length.

These are the same barrels as used by Canadian Special Forces Snipers during Operation Anaconda in Afganistan at distances out to 2430 meters! For more information Click Here.

These barrels require installation by a gunsmith. This installation work would include threading, chambering, cutting to the desired finish length and muzzle brake installation and any outside finish work such as blueing, teflon coating, bead blasting, etc. We do not do any gunsmithing work or barrel installations on customer receivers. But we can make a gunsmith recommendation when requested.

Our delivery time on these barrels is normally about 8 weeks.

We make our .50 caliber barrels with a .500" diameter bore diameter and a .510" groove diameter. The twist rate options are 15" (for the 50 BMG cartridge) and 32" and 48" (for black powder guns and limited to 30" finish length).

Prices as of January 1st 2010:

For example, a 36", 1.750" diameter stainless steel barrel would cost $445 + (6" x $10)= $505. Maximum finish length is 45" in the 15" twist.

Fluting

Fluting is available on barrels up to a 34" finish length.

Price: $130 for up to 30" finish length and $160 for 31" - 34" finish length.

Note: Prices do not include shipping charges. Montana has no sales tax.

Contours

These are our standard contours for the 50 BMG barrels.

For a larger image of the above drawings with weights for each in .html format - Click Here or in a .pdf image - Click Here

For a .pdf file listing of special .50 caliber tapers - Click Here

To see our special contour policy - Click Here

click for more info